Casio V-R100 User Manual

Page 15

Loading a USB Device

Steps
1 . Remove the side cover on the side of the main display . It

comes off easily when you insert your finger in the depres-

sion and pull it up .

2 . Insert a USB device into the USB slot .

3 . When removing the USB device, pull out the USB once it can

be safely removed . Be sure to attach the side cover when the

USB device is not in use .

● Do not adjust the main display while a USB device is loaded . It may cause the USB

device to touch something in the area and be damaged .

● Do not use with the side cover removed . Water or foreign matter may get inside and

cause a failure .

USB Hub Ferrite Core

When using a USB hub*, be sure to attach the ferrite core that came with the V-R100 to the cable for

the USB hub . If the ferrite core is not installed, it may cause a malfunction .
Installation Method

50mm

Ferrite core

Notch (female)

Closed state

Notch (male)

1 . As in the diagram, wrap the cable around the

ferrite core once .

2 . Close the core. Confirm that the notches of

the core are secured .

* A USB hub does not come with the V-R100 .

For detailed information, contact your sales outlet .