Casio CTK-3400 User Manual
Page 8
Getting Ready to Play
EN-6
■
Saving Settings
Your Digital Keyboard is equipped with a recorder and other
features that you can use to store data you create. This stored
data is retained even when the Digital Keyboard is turned off.
*
However, the tone, rhythm, and other settings you configure
on the Digital Keyboard’s console normally are returned to
their initial power on defaults whenever you turn off power.
* The data and settings below are always retained even
when power is turned off.
− Registration data (page EN-20)
− Song recording data (page EN-22)
Perform the following procedure when you want to return the
Digital Keyboard’s stored data and settings to their initial
factory defaults.
1.
Turn off the Digital Keyboard.
2.
While holding down
bo
(–/+) [–] and the
bq
(RHYTHM) [POPS] button at the same time,
press
1
(
P).
• Keep
bo
and the
bq
(RHYTHM) [POPS] button
depressed until the next step is complete.
3.
When the message “Pls wait” appears on the
screen, release both of the above buttons.
• You will be able to use the Digital Keyboard in a short
while after its system is initialized.
• See “Turning on Power and Playing” (page EN-7) for
information about turning digital power on and off.
Returning the Digital Keyboard to
Its Factory Default Settings
CTK3400SK_A5_x1a_EN_ES.indd 8
2013/10/09 18:58:24