Casio CTK-3400 - Manual (Page 6)

General Guide
EN-4
You can use the [+] (increase) and [–] (decrease) buttons
(
bo ) to change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
• Holding down 3 (FUNCTION) while pressing bo (–/+) [–]
will decrease the displayed number of value by 10. Holding
down
3 (FUNCTION) while pressing bo (–/+) [+] will
increase it by 10.
Use the FUNCTION button ( 3 ) to access settings that let
you select the reverb type, pedal effect, etc.
1.
Press 3 (FUNCTION).
2.
Next press 3 until the parameter whose
setting you want to change is displayed.
Each press of 3 cycles through the available
parameters.
• When selecting a parameter, you can scroll backwards by
holding down 3 as you press 4 (TOUCH).
3.
When the parameter you want is displayed, use
bo (–/+) to change its setting.
• The parameter setting will disappear from the upper left
area of the screen if you do not perform any operation
for some time.
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page EN-7).
Using the [–] and [+] Buttons ( bo )
M d e r n P n o
Setting
Using the FUNCTION Button ( 3 )
Parameter Display See Page
1 Transpose Trans. EN-13
2 Accompaniment Volume AcompVol EN-19
3 Tuning Tune EN-13
4 Reverb Reverb EN-12
5 Keyboard Channel Keybd Ch EN-25
6 Navigate Channels Navi. Ch EN-25
7 Local Control Local EN-26
8 Accomp Out AcompOut EN-26
9 Pedal Effect Jack EN-12
10 Pitch Bend Range Bend Rng EN-13
Parameter
Setting
T r a n s .
CTK3400SK_A5_x1a_EN_ES.indd 6 2013/10/09 18:58:24