Casio IT-2000D33E - Manual (Page 44)

E-45
Using a bar-code reader
1 Bar code scanning angle
Reading power: 0.19 mm (for PCS value of 0.85)
Angle (up to 45 degrees)
Wand position Effective angle
Handling Bar-Code Reader
Connect the bar-code reader to the Data Collector’s bar-code reader connector.
There are two models of bar-code reader: pen scanner DT-9650BCR, touch scanner DT-
9656BCR.
Connecting the bar-code reader
1
Turn the power on the Data Collector off.
Open the cover of the bar-code reader
connector.
2
Insert the plug of the bar-code reader into the
connector as shown on the picture.
Detaching bar-code reader
Turn the power on the Data Collector off. Unplug the bar-code reader connector.
Cover