Casio LK-73 - Manual (Page 6)

E-37
Song Memory Function
1 Track 1
2 Playback turned on
3 Track 2
4 Playback turned off
Š With the above setting, Track 1 will play while Track 2
will not play.
J Record
Each press of the LEFT/TRACK 1 and RIGHT/TRACK 2
button while the keyboard is in record standby (see “Song
Memory Button Operation”) toggles recording to the
corresponding track on and off. The letter that identifies a
track (L or R) flashes on the display whenever recording to
that track is turned on.
1 Playback turned on
2 Record turned on
Š The above indicates that Track 1 will play back while
Track 2 is being recorded to.
With real-time recording, the notes and chords you play on
the keyboard are recorded as you play them.
1.
Use the SONG MEMORY button to enter record
standby.
1 Flash
2.
Use [+] and [–] to select 0 or 1 as the song
number.
Š The track is not yet selected at this point.
Š The below song number screen remains on the
display for about five seconds. If it disappears
before you have a chance to select a song number,
use the SONG MEMORY button to display it
again.
1 Song number
3.
Press the LEFT/TRACK 1 button to select Track
1.
Š The “L” flashes on the display to indicate the
track that will be recorded to.
1 Flash
4.
Make any of the following settings if you want.
Š Tone number (page E-18)
Š Rhythm number (page E-21)
Š MODE switch (page E-22)
Š If you are not confident about playing at a fast
tempo, try using a slower tempo setting (page
E-22).
5.
Press the START/STOP button to start real-
time recording to Track 1.
6.
Play something on the keyboard.
Š Any melody and accompaniment you play on the
keyboard (including Auto Accompaniment
chords played on the accompaniment keyboard)
is recorded.
Real-time Recording to Track 1
To record to Track 1 using real-time
recording
641A-E-039A