5 alarm-gps speed, Alarm-gps speed – EverFocus EMV1200 User Manual
Page 67
59
4.4.5 Alarm-GPS Speed
Figure 4-21 Alarm – GPS Speed
Speed Unit: If the speed is being recorded from the GPS receiver, the desired speed display units must be
selected. Select GPS speed unit from KPH and MPH. Selecting MPH converts the GPS signal to display
speed in miles per hour.
GPS Speed: Select whether to record the vehicle speed or not.
Speed Higher Limit: Set the speed to determine at which level the alarm will be triggered.
Click
button to return to the previous level of menu.