Casio DT-900 - Manual (Page 53)

E-55
6
Position the base on the wall where you want
to hang the Satellite Cradle, and use an awl
or some other sharp object to mark the
positions of the two wood screws.
7
Slip a spacer over each of the wood screws
and then drive the screws into the wall at the
positions you marked in the previous step.
Make sure that the spacers are oriented
correctly. You will not be able to hook the
Satellite Cradle onto the screws if the spacers
are backwards.
8
Re-attach the base to the Satellite Cradle,
orienting it upside-down from its original
mounting position when you removed it, and
secure it in place with the two screws.
9
Hook the Satellite Cradle onto the wall unit
screws in the wall, and slide it down to lock in
place.
Important! • Be sure to check the wood screws periodically for looseness and
tighten if necessary after hanging the Satellite Cradle on a wall.