E-28 beam width adjustment bar code – Casio DT-900 User Manual

Page 26

Text mode
Original mode

E-28

Beam Width Adjustment Bar Code

For down-facing reader port model

For forward-facing reader port model

[Handling Precautions]

• The Data Collector is shipped with the laser beam width already

adjusted. So, the laser beam width need not be adjusted. Adjustment is
necessary only when the laser beam does not switch to the correct
position when the beam width is switched.

* Adjustment results are stored in memory.
* Factory settings are returned to if the Data Collector is reset or all

built-in batteries are removed, preventing memory backup.

• If adjustment is not successful, an error message is displayed. If this

happens, retry adjustment.

Using the Bar Code Reader