1 connecting the remote pc and server, 2 remote view – EverFocus EDR1600 User Manual
Page 59
Administrator’s Guide and Operating Instructions
55
file of EDR 1600 from any PC in anywhere. The remote computer does not
need to have the EDR1600 software or any special hardware and software
installed.
10.1 Connecting the Remote PC and Server
Before you start, please verify the connection between EDR1600 and the
ISDN, modem or network. The procedure for configuring a remote PC
depends on the desired type of connection. The user can either dial directly
into the server through ISDN, modem, or connect over a network. You
must obtain IP addresses for the remote PC and EDR1600, please refer to
Chapter 6.15 System Configurations for the details.
10.2 Remote View
After the Remote PC and EDR1600 are connected, start your Web browser
and enter the system IP address in the Location/Address field. (Note.1)