beautypg.com

Rear spacers, Levelling, Removing the shelf holders – Electrolux 925033685 User Manual

Page 18: Door reversibility

background image

Rear spacers

In the bag with the documentation, there are

two spacers which must be fitted as shown in

the figure.

Slacken the screws and insert the spacer under the

screw head, then tighten again the screws.

Levelling

When placing the appliance ensure that it stands

level. This can be achieved by two adjustable feet

at the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers

that make it possible to secure the shelves during

transportation.

To remove them proceed as follows:

1. Move the shelf holders in the direction of the

arrow (A).

2. Raise the shelf from the rear and push it for-

ward until it is freed (B).

3. Remove the retainers (C).

Door reversibility

WARNING!

Before carrying out any operations, remove the plug from the power socket.

1

2

3

A

B

C

18

Installation