Auriol 103806-14-xx - Manual (Page 45)

44 GB/MT
�
Switching the alarm on / off
Switch the alarm on or off by pressing and
keeping pressed the START button 2 and the
RESET button 4 while in time mode. If the
alarm is switched on, the alarm symbol 7
appears in the display.
When the alarm sounds, you can activate
the Snooze function by pressing the START
button 2 . The alarm sounds again after 4 to
5 minutes. The alarm will keep on sounding as
many times as you press the START button 2 .
Press the RESET button 4 to stop the alarm.
The alarm will keep on sounding for approx. 1
minute if you don’t press any button.
Press the RESET button 4 when the watch is in
time mode to display the alarm time.
If the watch is in time mode, press and keep
pressed the RESET button 4 . Press the START
button 2 to switch off the alarm. The alarm
symbol 7 disappears.
�
Activating / deactivating
the acoustic signal
Note: An acoustic signal will sound every hour on
the hour.
Press the MODE button 6 repeatedly until the
time field 3 appears in the display.
Press and keep pressed the RESET button 4
and while doing this, press the MODE button
6 . All the day of the week fields 1 appear.
The audible signal function is activated.
103806_15_Auriol_ES_PT_02.indb 44 8/20/14 12:17 PM