Auriol 2-LD3915-1-4 - Manual (Page 23)

- 21 -
Time setting
Carefully pull the crown out all the way. Turn the
crown clockwise or counter clockwise to set the
time. Press the crown back to the case to complete
the setting.
Shortening the band
2-LD3915-1 & 2
Your watch band is equipped with an additional
link with a fastener to simplify band shortening.
Open the fastener of the band and of the
additional link. Remove the additional link and re-
close the fastener of the band.
Shortening the band 2-LD3915-2
Shortening of the strap can also be achieved by
removing segments. Open the buckle and place
the wristwatch on a soft surface with the dial
facing downward. The segments that can be
removed are marked with an arrow. Push a
pointed tool into the opening on the side of the
band and push the bolt out of the band in the
direction of the arrow. Pull out the bolt (using
pliers if necessary). The band can now be
disassembled. The strap can now be
disassembled. Remove as many segments as
necessary in the described fashion and
reassemble the strap by pushing the bolt inwards
in the opposite direction of the arrow.
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free
cloth. A glasses cleaning cloth is ideal.
Replacement of battery (SR626SW)
Battery replacements must be performed by an
expert to avoid damaging the case or gaskets.
Water resistance
Water resistant up to 3 bar. The bar value
specifies the atmospheric overpressure which is
applied during testing (DIN 8310).