beautypg.com

Operation, Setting the time manually – Auriol Z30239 User Manual

Page 12

background image

12 GB/IE

Operation

The reception of the MSF radio time signal by the alarm clock can

also be started manually.

Press and keep pressed the REC button

5

for a short while.

The alarm now starts to receive a signal again.

Note: If the alarm clock was not able to receive the MSF radio

time signal because of data errors, e.g. due your location to being

at too great a distance from the transmitter or for other reasons,

you can set the time manually.

Setting the time manually

Press the M.SET button

4

for at least 3 seconds. The alarm

clock switches into manual mode.

Press and keep pressed the M.SET button

4

again until the

hands reach the correct position for you to set the time. Release

the M.SET button

4

when the hands have reached the desired

position.

Briefly pressing the M.SET button

4

moves the hands forward

in one minute steps to enable you to set the current time manually.

79133 GB.indd 12

9/20/2012 3:31:03 PM