Auriol Z31481A_B_C - Manual (Page 21)

21 GB/IE
Setting the alarm
Press and hold the ALARM 1 button for 3 seconds to
switch from clock mode to alarm mode. The weekday field
14 will display ALM. at the bottom left. This indicates the
radio controlled alarm clock is in alarm mode. At the same
time the alarm symbol
10 will appear in the info
field 7 , indicating the alarm function is now ready for
use. The hour display will flash.
Press the + / RCC 3 or - / °C / °F 4 button to adjust
the hour display.
TIP: Press and hold the + / RCC or - / °C / °F button
to quickly increase or decrease the numbers.
Press the ALARM button again to confirm your entry. The
minute display will now flash.
Press the + / RCC 3 or - / °C / °F 4 button to adjust
the minute display.
TIP: Press and hold the + / RCC or - / °C / °F button
to quickly increase or decrease the numbers.
Press the ALARM button again to confirm your entry. The
ALM indicator will return to the weekday display. The ra-
dio controlled alarm clock will now return to clock mode.