Auriol Z30237B_C - Manual (Page 26)

26 GB/MT
Press and keep pressed the WAVE button 21
for longer than 3 seconds. The LCD radio-con-
trolled wall clock attempts to receive the DCF
radio time signal. This process takes several
minutes and is indicated in the LC display by a
flashing radio symbol
2 .
Note: If the radio-controlled clock cannot pick up the
DCF radio signal on account of an error or the distance
from the transmitter, etc., it is also possible to set the
time manually. As soon as reception of the DCF sig-
nal is successful, the manual settings are overwritten.
Setting the year / month /
date / time / day of the week
1. Press and keep pressed the WAVE button 21 for
approx. 3 seconds. The radio symbol 2
flashes.
2. Press and keep pressed the WAVE button 21
again for approx. 3 seconds to stop the recep-
tion of the radio time signal.
3. Press and keep pressed the SET button 25 for
approx. 2 seconds. The year display flashes.
4. Set the desired value by pressing the UP 23 or
DOWN button 22 .
5. Confirm your settings by pressing the SET but-
ton 25 . The month display flashes.
6. Repeat steps 4 and 5 to set the values for day,
hour, minute and day of the week.
The following languages are available:
GER = German
FRE = French
SPA = Spanish
ITA = Italian
DAN = Danish
DUT = Dutch
ENG = English
Q
Using the 12 / 24-hour display
While time display 1 is indicated press the
UP button 23 to switch between 12- hour and
24-hour format.
Note: The AM icon 14 on the LCD stands for
mornings in 12-hour format. The PM icon 13
on the LCD stands for afternoons in 12-hour
format.
Setting the alarm
Press the SET button 25 once or twice to select
alarm 1 15 or alarm 2 16 .
Press and keep pressed the SET button 25 for
about 2 seconds. The hour display flashes.
Press the UP 23 or DOWN button 22 to set
the desired value.
Press the SET button 25 to confirm your setting.
The minute display flashes.
Press the UP 23 or DOWN button 22 to set
the desired minute value.
Press the SET button 25 to confirm your setting.
Press the SNOOZE button 20 as soon as the
alarm signal sounds. The alarm signal stops
sounding. The alarm will sound again 5 minutes
after the set waking time or alarm time.
Press any button except the SNOOZE button 20
to stop the alarm signal sounding.
Activating / deactivating the
alarm
Press the ALARM button 24 briefly. The appro-
priate alarm symbol 15 or 16 is dis-
played to indicate that the alarm is activated.
Pressing the ALARM button 24 again causes
the appropriate alarm symbol 15 or 16
to cease to be displayed. The alarm is deacti-
vated.
Switching off the alarm signal
Press any button except the SNOOZE button 20
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
Note: The alarm signal switches itself off after
2 minutes.