Auriol H14371 - Manual (Page 17)

17 GB/IE
Battery operation
The inserted batteries are only to backup the clock display and alarm
function. In the event of a power failure the light alarm clock will auto-
matically switch to battery mode. The clock will continue running in battery
mode. To save energy, only the electronic alarm will sound. All light functions
and the radio are non-operational. Once power returns via the low voltage
jack
18 , all functions of the light alarm clock will be available again.
Change Batteries
Batteries should be replaced at least once a year to ensure reliable
function of the light alarm clock.
Open the battery compartment cover 20 on the underside of the
light alarm clock by pressing the latch in the direction of the arrow
and remove the old batteries.
Insert three new type AA, 1.5 V batteries. When inserting the
battery ensure the correct polarity. This is shown in the battery
compartment.
Close the battery compartment cover.
Cleaning and Care
Unplug the mains adapter 15 from the outlet before cleaning the unit.
The device should only be cleaned on the outside with a soft dry
cloth.