Auriol Z31793 - Manual (Page 42)

42 GB/MT
flashes in the top left-hand corner above the timer and the
timer begins counting up.
Press the T1 key or the START / STOP (MEMORY) key 6 to
stop the timer‘s counting operation and the acoustic signal.
Press the CLEAR key 7 to reset the counter to 0.
Set the timers next to the T2 9 and / or T3 keys 8 in the same
way.
Interrupting the sequence of a timer
Press the key next to the appropriate timer (T1, T2 or T3 key)
to stop the time sequence of the appropriate counter at any
time, and also to reactivate it.
Q
Memory function
Memory function of individual timers
Each timer saves the most recently selected time. Pressing the T1,
T2 or T3 key
10 , 9 or 8 in Timer mode opens the most recently
selected time for the appropriate timer in the display 1 .
Press the appropriate T1, T2 or T3 key again to activate the
timer belonging to this key.
Press the appropriate T1, T2 or T3 key to stop the acoustic
signal.