Auriol 1-LD3794-3 - Manual (Page 32)

- 30 -
Features
• Time
• Date and day of the week
• Stop watch
• Alarm with snooze
• Hourly chime
• 12/24 time display
• Backlight
Light
Press LIGHT to briefly activate the light.
Time setting
Press MODE 3x to go from normal time display mode to time
setting mode. The seconds will blink on the display and can be
reset by pressing START. Press RESET to confirm the setting.
The hours will blink on the display. Press START to set the hours. If
the hours are increased by more than 24 hours, the watch will
switch from 24 hour time mode H to 12 hour time mode A or P and
vice versa. Press RESET to confirm the setting. The minutes will blink
on the display. Press START to set the minutes. Press RESET to
confirm the setting. The month will blink on the display. Press START
to set the month. Press RESET to confirm the setting.
Set the date and the day of the week in the same way.
Press MODE to exit time setting mode.
Alarm setting
Press MODE 2x to go from normal time display mode to alarm
setting mode AL. Press RESET to begin setting the alarm time. The
hours will blink on the display and can be set by pressing START.
Press RESET to confirm the setting. The minutes will blink on the
display. Press START to set the minutes and press RESET to confirm
the setting.
Press MODE to exit time setting mode.
Activating the alarm
Press MODE 2x to go from normal time mode to alarm setting
mode AL. Press START to activate the alarm AL/ALM. Press START
again to activate the hourly chime CHIM. Press START once more
to activate both the alarm and the hourly chime AL/ALM + CHIM.
Deactivate the alarm by pressing START.
Press MODE to return to normal time display mode.