Auriol Z29962A - Manual (Page 13)

15 GB
from the external sensor. When it has successfully
received the external sensor signal, the outdoor
temperature
7 appears on the LCD after around
1 minute.
Note:
do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.
The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing
icon 15 .
Once the DCF radio signal has been picked up
successfully, the
icon 15 is displayed constantly
on the LCD.
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
˽
If the weather station does not work properly, you
can restart it by pressing the ADJUST button
12 .
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
tinues, you can also set the time and date manually
(see “Setting the time / date manually”).
© Mounting the product on a wall
Note: You will require an electric drill and a Phillips
screwdriver for this step.
64089_aur_Wetterstation_Content_LB4.indd 15 03.03.11 10:05