Preparing the product for use / installation, Setting the time, Installation – Auriol Z30238 User Manual
Page 7

9
GB/IE
Preparing the product for use / Installation
Note: If you wish to replace the battery, take the used battery
out of the battery compartment
7
.
Insert a battery type 1.5 V / AA (included) into the battery
compartment
7
.
Note: Make sure you fit the battery the right way round (polarity).
The correct polarity is shown inside the battery compartment
7
.
Close the cover
6
.
Note: The clock starts to operate as soon as the battery is inserted.
Setting the time
To set the time, turn the small wheel
8
until the hands are in the
desired positions (see Fig. B).
Note: The temperature display cannot be changed.
Installation
Note: The bathroom clock can be hung on the wall using the suction
cups
4
or the hanger
1
or be mounted on the stand
5
.
Suction cups:
Note: The surface on which the bathroom clock is to be fixed using
the suction cups must be clean, dry and free of grease.
Screw the suction cups
4
anticlockwise into the hanger
1
and
mounting holes (for suction cup)
2
(see Fig. A).
66592_aur_Bad-Wanduhr_Content_LB4.indd 9
03.06.11 08:35