Auriol Z30238 - Manual (Page 35)

37 GB/MT
Installation
Hold the bathroom clock against the wall so that the four suction
cups 4 are in contact with the wall and press the bathroom clock
against the wall until all the air has been expelled from the suction
cups
4 .
Hanger:
CAUTION! DANGER TO LIFE AND RISK OF INJURY;
RISK OF DAMAGE TO PROPERTY! Please read the operating
and safety instructions for your drill carefully.
DANGER TO LIFE! Please ensure that you do not
drill into any electrical wiring, gas or water pipes in the wall. If necessary,
carry out checks with a wire, pipe and stud detector before you drill
into a wall.
Find a suitable place for the bathroom clock.
Mark the drill hole on the wall.
CAUTION! DANGER OF INJURY! Refer to the operating
instructions for your electric drill.
Drill the hole with a drill.
Insert a suitable wall plug into the drill hole.
Use a screwdriver to insert a suitable screw.
Hang the bathroom clock by placing the hanger
1 on the screw.
Stand:
Insert the stand 5 into the mounting holes 3 for the stand.
Place the bathroom clock down on a level surface.
66592_aur_Bad-Wanduhr_Content_LB5.indd 37 03.06.11 08:35