Techical specifications trouble shooting guide – Curtis SRCD159PL User Manual
Page 10

CD compatible discs/files
FM frequency range
AM frequency range
General Output power
Power consumption
Speakers
AC adapter
Dimension
Weight
CDs disc format and support CD-R or CDRW playback
87.5 ~108 MHz
530 ~ 1710 kHz
4.4W (2 channel x 2.2W)
16W
2 x 3”, 4 Ohm
Input: AC 120V~60Hz
Output: DC 9V DC
250(H) x 400(W) x 110(D) mm
2.2 Kg
Note:
Due to continuing improvements, the technical specifications are subject to
change without notice
Problems
Recommendations
The player or display
is not working properly.
Press the
ON/STANDBY button to go to standby mode
and press it again to turn the unit back on.
Reset the unit by unplugging the AC adapter for 15
minutes, then plugging it back in.
No sound, poor sound.
Check the cable connections.
Use the
SOURCE button to select the correct mode.
The disc does not play.
Reinsert the disc with the printed side facing up.
Ensure that the disc is clean and in good condition.
Only CDs format and CD-R/RW discs can be played.
Clean the disc.
Noise or distorted sound
in radio mode.
FM mode: Extend and position the FM antenna to achieve
the best reception.
AM mode: Remove the unit to achieve the best reception.
TECHICAL SPECIFICATIONS
TROUBLE SHOOTING GUIDE
9