Ix before repair, Problems causes – Curtis SKCR2644A User Manual
Page 33
IX Before Repair
The following phenomenon does not indicate failures. Before you contact us for repair, please
check your device according to the approaches below.
- 3 1 -
Problems
Causes
No picture or sound
No signal
No sound
Mosaic images
Too-dark images
Power wire is not properly connected;
the functioning power source is not recognized;
or there're breaks in the power wire.
Check whether the antenna is located well;
Check the parameter of image or region is set
correctly; if not, please set or search again.
If the volume is turned down to the minimum;
single is too weak, and Silence function is active.
The signal strength is too weak.
Check whether the brightness and contrast of your
display is adjusted well; if not, readjust it.
See also other documents in the category Curtis Clock:
- CR1355 (1 page)
- RCD951 (1 page)
- RCD951 (10 pages)
- IP2604UK (1 page)
- CR4975 (16 pages)
- SCR1383 (1 page)
- CR2606 (14 pages)
- KCR2606 (1 page)
- KCR2606 (12 pages)
- RCD633 (1 page)
- CR4947 (1 page)
- SCR1384 (1 page)
- SRCD247 (1 page)
- CR1383 (1 page)
- SCR1320 (1 page)
- KCR2607 (1 page)
- cr1274 (1 page)
- KCR2611UK (14 pages)
- KCR2611UK (15 pages)
- RCD3830 (1 page)
- RCD3830 (23 pages)
- SRCD633 (1 page)
- SCR4975 (14 pages)
- SCR4975 (1 page)
- CR1345 (1 page)
- CR1274UK (1 page)
- CR1320 (1 page)
- CR4966 (1 page)
- IP250 (1 page)
- SCR1371 (1 page)
- CR2608 (1 page)
- RCD224 (8 pages)
- KCR2613 (1 page)
- SCR4503 (1 page)
- CR3988 (20 pages)
- CR1252 (8 pages)
- TCR1276 (8 pages)
- CR1414BUK (1 page)
- CR4940 (5 pages)
- CR397BUK (1 page)
- KCR2622UK (17 pages)
- NS-C2116 (19 pages)
- SCR1986BT (9 pages)
- TID5030 (14 pages)
- SKCR2613C (2 pages)