Curtis DRC8320N - Manual (Page 14)

Graphics contained within this publication are for representation only. 12
Chapter 1: Connections and Setup
The back of
your TV
and/or Cable
Box might
look different
than the ones
pictured here.
DVD/VCR
Cable Box
TV
If you connect your components as described, you must access different Video Input Channels on your TV to see
programming. If you don’t know how to access Video Input Channels on your TV, go to page 22 for help. A general
explanation, based on the connection shown above, follows:
If you need help finding your TV’s various Video Input Channels, go to page 22.
DVD/VCR + TV+ Basic Cable Box
To play a disc: Tune the TV to its Input 1 channel or Vid 1 channel.
Notes about cable boxes:
The connection diagram shown above refflects a basic setup. Since there are many different cable companies and types of
cables boxes, your cable box may come with a different recommended connection diagram. Normally, ANALOG cable boxes
are used so that the cable company can scramble the signal for premium channel programming (like movie channels). The
cable box will descramble the signal if you are a premium channel subscriber. In some cases, your cable company may not
scramble the signal for basic channels and the signal could be passed through the cable box so that you could receive the
signal with the DVD recorder.
There are also DIGITAL cable boxes that are relatively new and are used with digital cable service. Even with digital cable
service, analog signals are often carried on the same cable.
Using the connection diagram above, you won’t be able to watch one program while recording another program. This may
be possible with a more sophisticated setup, using an optional signal splitter and A-B switch. We suggest you contact your
cable company for help in recommending the best setup for your situation.
ANT INPUT OUTPUT
VIDEO AUDIO VIDEO AUDIO
OUT S S
IN
VIDEO L R
INPUT1
INPUT2
S-VIDEO
CABLE/ANTENNA
S-VIDEO
CABLE IN CABLE OU T
VIDEO R
L
AUDI O
1a
2a
2c
2b