EverFocus EDR810H User Manual

Page 54

3.12 SYSTEM SETUP MENU

In the SYSTEM SETUP MENU, we define :

(1) SYSTEM VERSION: Current system firmware version.

(2) SYSTEM VIDEO FORMAT: NTSC or PAL System can detect the input signal type

automatically from camera 1 while system is booting up. Users do not need to set it up.

Note: The signal type is detected by the camera 1, so camera 1 input has to be connected.

(3) LOAD SYSTEM DEFAULT:

YES: Select YES to load system default.

NO: Select NO to do nothing.

System will ask you to stop recording if you confirm to load when system is recording.

(4) UPDATE SYSTEM SOFTWARE:

YES: Select YES(CF) or YES(USB) to update system software.

NO: Select NO to do nothing.

System will ask you to stop recording if you confirm to update when system is recording.

(5) CALL MON QUAD SEQ: The retention period of the call monitor quad display in the

sequence mode.

Note: Please refer to CALL setting for an advanced call monitor setting.