Curtis RCD882 - Manual (Page 17)

17
CD Radio Micro System
Care and Maintenance
Cleaning CDs
Use a soft cloth to remove fingerprints
and dust from the disc surface. Wipe in
a straight line from the centre to the
outside of the disc.
• Never use chemicals such as record sprays, anti-static sprays,
benzine or thinners to clean your CDs.
• To reduce the risk of scratches, always put CDs back in their
cases after use.
Do not expose CDs to direct sunlight, high humidity or high
temperatures for long periods.
• Do not stick paper or write on either side of the CD.
Only discs displaying this symbol can be played on this unit.
Cleaning the Lens
A dirty lens will cause sound skipping and, if the lens is very dirty, the
CD may not work. Open the CD door and clean the lens as follows:
• Unplug the power supply.
• Dust or Dry Particles - Using a
camera lens brush/blower, blow on
the lens a couple of times, then
wipe it lightly with the brush to
remove dust. Then blow on the lens
once more.
• Finger Prints - If the lens cannot be
cleaned by using a brush/blower,
use a dry cotton swab and starting
in the middle work to the outside
edge.
17