Curtis RCD882 - Manual (Page 13)

13
CD Radio Micro System
Removing CDs
To remove the CD press the STOP button then open the door as
described previously.
Remove the CD once it has stopped spinning.
Error Compensation
Your CD player has built in error compensation circuits that enable
constant play despite any minor defects in the CD surface. If, however,
the defects are too great, the play may jump or skip tracks during play.
If you encounter this problem, clean the disc or play a different disc. If
the CD player operates normally, the skipping problem may be due to a
defective disc.
Playing CDs
Once you have loaded a CD, press the PLAY/PAUSE button. The
display shows the track currently playing.
To stop play, press the STOP button.
Pause
To stop a track temporarily, press the PLAY/PAUSE button. The CD will
pause at the current play position.
To resume play, press the PLAY/PAUSE button again.
Skip Forward or Backward Through Tracks
To select the next track, press the SKIP/SEARCH forward button,
If you are on the last track of the CD, the player will return to
track 1.
To go back to the beginning of the current track press the SKIP/
SEARCH back button once.
To go back to the previous track press SKIP/SEARCH back button
twice.
13