Efficient Networks SpeedStream 5667 - Manual (Page 22)

SpeedStream Dual USB/Ethernet Router User’s Guide
Model 5667
22
Chapter 4
Configuring the Router
Before you can configure the SpeedStream ® USB/Ethernet Router with SecureRoute TM , the
TCP/IP protocol must be installed and configured on all computers in your network. If you need
to install TCP/IP, refer to your system documentation or online help. To configure TCP/IP, refer
to Chapter 3, “Configuring Network Settings” in this document.
After TCP/IP is installed and configured on your network computers, you can configure the
SpeedStream router from a Web browser, including Internet Explorer or Netscape Navigator,
versions 4.0 or above. The Web interface allows you to configure settings for the router, view
status, and access the many features of this unit.
Navigating the Web Interface
Using the Web interface, you can define system parameters, manage and control the router and its ports,
or monitor network conditions. The management interface includes the following menus: