Curtis IP320UKT - Manual (Page 8)

6
MODEL : 48652
• User guide
• Remote control
www.curtisint.com
Connecting Power
Connect small end of adapter to main unit DC
jack and plug the supplied adapter into
standard AC wall socket.
Warning!
The unit is designed to operate from a mains
supply of AC 230V~50Hz. If the adapter does
not fit properly, turn it over and again. Do not force it. When the unit not operation by the
AC power or unused for long periods of the time. Please press the POWER button to off
unit power and remove the power adapter from the wall outlet and unplug from the
main unit.
Remote Controls Operation
You must remove the spacer before using the remote for the first
time. To remove the spacer, pull on the small tab that is extending
outside the battery compartment as shown. The main functions of
this system can be operated by pressing the controls on the front
panel of the main unit, or by pressing the corresponding buttons on
the remote control.
You should point the remote control at the remote sensor on the
front panel. The effective operating range of the remote control is approximately
10 - 13 feet.
Please note that bright sunlight can interfere with the operation of the remote
control. If the remote operation is unsatisfactory, try darkening the room before
changing the remote battery. The battery should last at least 12 months or longer
under normal operating conditions.