Curtis IP320UKT User Manual
Page 11
9
MODEL : 48652
• User guide
• Remote control
www.curtisint.com
How to Using Radio
a. Power on the unit, press the FUNCTION button to Radio mode. How to Using Radio.
b. Automatic Tuning - Press and hold the FWD/TUNE or REV/TUNE buttons until the
display begins to move then release the buttons. The tuner will scan up or down
the band until it finds the first strong station, and then stop on that station. Repeat
this process until the tuner stops on your desired station.
c. Manual Tuning - Press and release the FWD/TUNE or REV/TUNE buttons repeatedly
until the display is showing the frequency of your desired station. Use the manual
tuning method to tune to weaker stations that are bypassed during Automatic
Tuning.
Programming Radio Station Presets
You can program as many as 20 radio station presets.
a. During power on mode, press FUNCTION button to select Radio
b. Press the FWD/TUNE or REV/TUNE buttons to desire station you want store.
c. Press and hold the CLK SET/MEM button to activate the programming mode.
d. Press the FWD/TUNE or REV/TUNE buttons to select the preset number you want
to
store.
e. Press and hold the CLK SET/MEM button to store the station. f. Repeat Steps “b”
through “e” to program additional presets.
To Recall the Radio Station Preset
Press the M- (REPEAT) or M+ (PLAY/PAUSE/M+) Button repeatedly until the preset
number you want appears on the display and the preset station will be sound.
Connecting Other Digital Audio Devices
a. Use a line-in cord to connect an iPod shuffle or other audio device to the Line-In
(AUX)
port.
b. Press the FUNCTION button to select the Line-In (Aux) mode. c. The iPod shuffle
or other audio device will now play through the speakers of the unit.
Warning!
If reception is weak, adjust FM Wire Antenna length and the angle to improve reception.