Curtis LCDVD2454A-B - Manual (Page 11)

19
CONNECTIONS & SETUP
EARPHONE
TV
EARPHONE CONNECTION
1. Connect the EARPHONE output of the TV
to the EARPHONE input on the set.
2. Turn on the TV, the earphone is sound, but
but the sepeaker no sound output.
20
BASIC OPERATION
If your TV will be turned on, you will be able to use its features.
Turning on the TV
First, Main power switch must be on postion, connect power cord
correctly. When the indicator illuminates red is standby mode.
Press the POWER/ button on the remote control,
after the TV initialization finished,
the indicator turns to blue. It means the TV is in power mode.
When you press the POWER/ button on the remote
control once again, the power/stand-by Indicator illuminates red
in standby mode.
If you intend to be away on vacation, disconnect the power
plug from wall power outlet.
1. Press the VOL +/VOL- button on the control panel or the
VOL +/VOL- button on the remote control to adjust the volume.
2. If you want to switch the sound off, press the MUTE button
on the remote control.
3. You can resume the sound by pressing the MUTE button
on the remote control.
Press the CH +/CH- button on the control panel or the Numerical keys
on the remote control.
TURNING THE TV ON
VOLUME ADJUSTMENT
PROGRAM SELECTION