Curtis LCD3957UK - Manual (Page 13)

OSD Menu
2. PICTURE Menu
Description
Picture Mode: Choose from Standard, Dynamic, User and Mild.
Note: Contrast, Brightness, Color and Sharpness are only available and can be adjusted in
the User mode option in the Picture Mode Settings.
Contrast: Controls the difference between the brightest and darkest regions of the picture.
Brightness: Controls the overall brightness of the picture.
Color: Controls the color.
Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.
Tint: Controls the relative colour tint ( NTSC ATV mode only).
Color Temperature: Choose from Medium, Cool, User and Warm. When the User mode is
Red: Controls the red colour of the picture.
Green: Controls the green colour of the picture.
Blue: Controls the blue colour of the picture.
Aspect Ratio: Choose from 4:3, 16:9, Zoom1, Zoom2 and Panorama.
Note: The aspect ratio modes you can select will vary according to the input source.
Noise Reduction: Choose interference noise modes from Off, Low, Middle, High and Default.
Screen (PC mode only):
Press the OK
button to enter the submenu to adjust Horizontal / Vertical position, Size or Phase of the picture.
selected, the individual intensity of each colour (Red, Green, Blue) can be adjusted.
These adjustments are only available once the Input Source is set to
“PC”, and an analogue VGA signal is present at the VGA input socket of the TV.
11