Curtis LCD3957UK User Manual
Page 11
OSD Menu
1. CHANNEL Menu
Description
Auto Scan
OK button to enter the hint menu, and select the
Country and Tune Type mode for the TV, then press
OK
button to start auto tuning. You can select “ATV+
DTV” to tune both Analogue and Digital TV stations at the
same time. Once the TV has
completed the Scan, all
receiveable TV stations will have been stored.
DTV Manual Tuning
Press the OK button to enter the DTV Manual Tuning menu,
select a DTV channel, and press
OK
the button to start
ATV Manual Tuning
Press the OK button to enter the ATV Manual Tuning menu.
Storage To: Select a position for storing the program.
System: Select a TV system for searching. In Australia,
select “BG”.
Current CH: Select the channel you want to manually tune.
Search: Press the < / > buttons to manual search.
Fine-Tune: Press the < / > buttons to fine-tune.
Frequency: Display the current frequency.
Note: Press the RED button on the remote control to save all
the setups you have changed.
UK
Use the V cursor to select Auto Scan, then press the
Note: The Auto Scan function will over-write all previously
stored TV stations.
Before you can receive any TV signals, the TV must
first scan through the available local channels and
store their settings.
the
searching.
9