Curtis LCD3957UK - Manual (Page 10)

buttons to select the function item, press button to adjust/setup,
Basic Operation
Power on/off
1. Connect the TV to a mains power socket with the supplied power cord.
3. -To turn on the TV from standby:
Press the POWER button on the side panel of the TV, or use the
-To return the TV to standby mode.
Press the POWER button again on the side panel of the TV or
Input Source select
Press the INPUT button on the TV set or remote control to display the
input source menu, and use CH+/- button on the TV set or
buttons
on the remote control to select the input source. Press the OK button
on the remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared and already connected to your equipment.
Basic OSD (on- screen display) Menu operation
Press the MENU button to display the OSD menu as below:
Use the /
/
cursor buttons on the remote to select the required main menu, and press the
cursor button to enter the submenu.
In the submenu, use the
/
or press the OK button to enter the submenu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input a suitable signal or connection can some functions be activated.
Note2: Please operate the OSD menu according to the hints on the bottom of the screen.
Main menu
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
Submenu
(CHANNEL menu
for example)
Hint---you should operate the OSD menu according to the hints at the bottom of the screen.
power button on the remote control.
2. Activate the main power On/Off switch (located at the bottom right-hand corner of the TV).
Check that the LCD power indicator on the front panel glows red.
remote control.
DTV
ATV
SCART
YPBPR
PC
HDMI1
HDMI2
HDMI3
AV
USB
8