Parkside PWS 125 B2 - Manual (Page 4)

4
GB
Content
Introduction ................................. 4
Intended purpose ......................... 4
General description ...................... 5
Extent of the delivery ........................5
Description of function ......................5
Overview ........................................5
Technical Data .............................. 5
Notes on safety............................ 6
Symbols and icons ...........................6
General Safety Directions for Power
Tools ...............................................7
Safety instructions for all applications .9
Additional safety instructions ...........10
Residual risks .................................11
Kickback .......................................12
Additional safety instructions for
sanding ........................................12
Additional safety instructions for
working with wire brushes ...............12
Special safety instructions for grinding
and cutting ....................................13
Other special safety instructions for
cutting grinding .............................13
Practical tips ..................................14
Assembly ................................... 14
Mount handgrip .............................14
Assemble/set protective hood ..........14
Installing/changing disc .................14
Operation .................................. 15
Turning on and off ..........................16
Cleaning and servicing ...........16
Cleaning .......................................16
Storage ...................................... 16
Waste disposal and
environmental protection ........... 17
Troubleshooting ......................... 17
Replacement parts/Accessories .. 18
Guarantee ................................. 19
Repair-Service ............................ 20
Service-Center ............................ 20
Importer .................................... 20
Translation of the original
EC declaration of conformity .... 133
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The angle grinder is a tool for cutting,
scrubbing and brushing metal without
using water.
The device is not intended for any other
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding or cutting hazar-
dous materials such as asbestos).
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is to be used by adults. Children
under the age of 16 may not use the tool
except under supervision.