Parkside PDSS 310 A1 - Manual (Page 15)

15 GB
… / Environmental instructions and disposal information / Declaration of Conformity Troubleshooting / Information about warranty and service processing
parts subject to normal wear and tear and which
can therefore be considered as wear items, or to
damage to fragile parts, e.g. switches, storage bat-
teries or glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the operating instructions must
be followed strictly to constitute proper use of the
product. Applications and actions which the opera-
ting instructions warn of or advise against must be
avoided without fail.
This product is intended for private, non-commercial
use only. The warranty is void in the case of inap-
propriate and improper handling, use of force and
of any intervention which was not carried out by
our authorized service branch.
Processing of warranty claims
Please follow the instructions below to ensure quick
processing of your matter:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The item number can be found on the type plate,
engraving, the cover page of your instructions (bot-
tom left) or the decal at the back or bottom.
In the event of malfunctions or other defects please
first contact the service department below by
phone or e-mail.
A product recorded as defective, along with the
proof of purchase (sales receipt) and a description
of the defect and when it occurred, can then be re-
turned free of charge to you to the service address
provided.
Note:
Visit www.lidl-service.com to download
this and many other manuals, product
videos and software.
How to contact us:
Name: C. M. C. GmbH
Website: www.cmc-creative.de
E-mail: [email protected]
Phone:
+49 (0) 6894 9989752
(standard German landline
rates apply)
Registered office: Germany
IAN 73786
Please note the following address is not a service
address.
Please first contact the above service address.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
Environmental instructions
and disposal information
Don‘t waste, recycle!
Equipment, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not dispose of the compressed air tool through
your household waste, or throw into fire or water. If
possible, non-operational devices should be recy-
cled. Contact your local retailer for information.
Declaration of Conformity
We,
C. M. C. GmbH
Documentation officer: Marc Uhle
Katharina-Loth-Str. 15
66386 St. Ingbert
73786_par_Druckluft-Schlagschrauber PDSS 310 A1_content_LB4.indd 15 31.05.12 12:21