Ericsson CF388 - Manual (Page 18)

30
To Reach Your Answering Machine.
You can call your Answering Machine at any time. If you’re calling
from your Omnipoint handset:
> Dial
A123 and press F.
> When prompted, enter your PASSWORD.
> If you have any messages, your first message will
automatically begin playing.
> Each message will be saved automatically unless you delete it
by pressing 7.
If you are calling from another phone or roaming outside the
Omnipoint coverage area, here’s how to reach your Answering
Machine.
> Dial
1, the area code and the first 3 digits of your
Omnipoint phone number, plus MAIL (6245). Example:
1-201-757-MAIL.
> When prompted, use the keypad to enter your MAILBOX
number. (This is your Omnipoint phone number, including
area code.)
> When you hear your greeting, press
A.
> Enter your PASSWORD using the keypad, and proceed as
described above.
29
Listening To Your Messages.
When you reach your Answering Machine, press
1 to play your
messages.
While listening to voice messages on your Answering Machine, you
can control playback by using your handset keys. Here are the
functions you can perform:
> To back up and continue the current message, press
1.
> To replay the current message, press
11.
> To pause a few seconds, then continue playing messages,
press
2.
> To skip ahead and continue the current message, press
3.
> To skip ahead to the end of the current message,
press
33.
> To hear the Date/Time when the message was recorded,
press
5.
> To delete the message being played, press
7. If you do not
delete a message, it will be saved automatically.
> To save the message being played, press
9.
> To “un-erase” a message, press
A3 before you
disconnect and the messsage will be returned to your Mailbox.
> To skip the current message and advance to the next message,
press
B.
(Note: if you receive a new message while you are in your Answering
Machine, you will be notified with three short beeps.)