Epson 1270 - Manual (Page 68)

62
R4C479
short.bk
Rev_C
A5 size TRBLE.FM
2/15/00 Pass 2
L Proof Sign-off:
M.Otsuka
_______
N.Nomoto _______
editor name _______
Color gaps
Try one or more of these solutions:
❏ Make sure your paper is not damaged, dirty, or too old.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Check the B
black and
A color ink out lights. If a light is
flashing, replace the ink cartridge. See “Replacing Ink
Cartridges” on page 40.
Blurry or smeared printout
Try one or more of these solutions:
❏ Make sure the printable side of the paper is face up in the sheet
feeder.
❏ Make sure your paper is not damaged, dirty, or too old.
❏ Set the adjust lever to the “+” position, and make sure the
Media Type setting in your printer driver is correct.
Paper feed or paper jam problems
If the printer doesn’t feed paper, feeds multiple pages, or the
paper is jammed, remove and reload the stack of paper, then press
the
E load/eject button. Also make sure of the following:
❏ The paper isn’t old or creased.
❏ Paper isn’t loaded above the arrow on the left edge guide.
❏ The edge guides are set correctly.
❏ The paper isn’t too thin or rough. Use paper that meets the
paper requirements for this printer. See the online Reference
Guide for paper specifications.