Magnum Energy Filter Box (MS-CEFB) User Manual

Page 6

Installation

Figure 5, Attaching the MS-CEFB to the Inverter

Remove DC ground hardware

(7/16" Hex*)

Remove DC +/- terminal nuts

(1/2” Hex*)

Remove AC access cover

(#2 Phillips*)

Remove cover screws on each side

(#25 Torx*)

MS-PE or MS-E inverter

Stage I – Prepare Inverter

Stage II – Connect Filter Box to Inverter

Stage III – Attach & Tighten Hardware

Note: Before

re-attaching the

inverter’s DC

terminal nuts,

ensure the filter’s

DC busbars are

properly fitted over
the terminal bolts.

* Tool needed

to remove