Emotiva XPA-1 - Manual (Page 5)

Safety Precautions
Read this User’s Guide thoroughly before attempting to install and configure X Series Amplifier. All the safety and operation
instructions should be read before any operation of the component(s) begin. After successful installation and configuration
of the amplifier, be sure to retain this manual in a safe place for any future reference needs.
The following situatio
• The power‐supply cord or the plug has been damaged; or
• The X Series Amplifier has been exposed to rain; or
he X Series Amplifier does not appear to operate normally or exhibits a marked change in performance; or
he X Series Amplifier has been dropped, or its enclosure or chassis is damaged.
he user should not attempt to service the X Series Amplifier beyond the means described in this Operation Manual.
All warning on the amplifier and in this Operation Manual should be followed. Safety is a key component
to a long lasting, trouble free installation. The vast majority of the safety precautions are simply common
sense. If you don't feel comfortable performing the installation of audio/video entertainment equipment,
it is advised that you seek the services of a qualified installation professional.
NEVER use X Series amplifiers near water such as a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc. There is a risk of electric shock to your body and permanent damage to the
equipment. Electric shock may result in permanent bodily injury or death.
This amplifier should be installed in a location which provides adequate ventilation. The amplifier should not be installed on
a bed, sofa, rug, or other similar surfaces that would block any of the ventilation openings; nor should the amplifier be
installed in a closed environment that may impede airflow through the ventilation openings on the amplifier. Should you
choose to install the amplifier in a closed equipment rack be sure to add forced air ventilation to provide adequate air
circulation. The amplifier should be situated away from heat sources such as radiators or other heat producing devices.
Emotiva amplifiers should be connected only to a power supply as described in this Operation Manual or shown on the label
located on the back of the amplifier. The power cord should be routed so that it avoids high foot traffic areas; and, placement
of the power cord should avoid locations where heavy items may be place upon or against it. Special attention should be
given where the power cord will plug into the wall outlet, convenience receptacles, and the point where the power cord
attaches to X Series Amplifier.
The power cord of the amplifier should be unplugged from the outlet when unused for a long period of time. Never spray
liquids directly into the component’s vent openings. Care should be taken so that small objects do not fall into the inside of
the amplifier.
ns require your Emotiva X Series Amplifier is serviced only by qualified service personnel:
Objects have fallen, or liquid has spilled into the component; or
• T
• T
T
All other servicing should be referred to Emotiva's service personnel.
5