Emotiva XPA-1 - Manual (Page 31)

TECHNICAL SPECIFICATIONS:
XPA‐1
Number of Channels: 1
Topology: Fully Discrete, Dual Differential, High Current, Short Signal Path Class A/B
Power output (all channels driven):
1,000 watts RMS @ 4 ohm (0.1% THD)
500 watts RMS @ 8 ohm (0.1% THD)
Power Band Response: 20 Hz to 20 kHz with less than .05db deviation at rated power
Broadband Frequency Response: (‐3db): 5Hz to 150kHz
Amplifier Gain: 32db
Signal to Noise Ratio
1 watt: >89db
Full Power: >117db
Input Impedance:
Unbalanced – 20kohms
Balanced – 18kohms
Transformer Size: 1,200VA
Secondary capacitance: 120,000uF
Output Devices: 24
Size: 17” W x 7.75” H x 19.5” D (depth is measured from front faceplate to end of protective rear panel rubber pieces)
Weight: 75 lbs (89 lbs boxed)
continued, next page
31