Description, Data guide – Linx Technologies TRM-915-DTS User Manual
Page 3
– –
1
Description
The DTS Series combines a state-of-the art
low power wireless transceiver with a powerful
multipoint-to-multipoint protocol controller
to form a complete wireless communication
solution capable of replacing wires in almost any
RS-232/422/485 application. With a 115dB link
budget and very low power operation modes,
the DTS Series is excellent for AMR, RFID,
Home Automation, and any other application
requiring long range (1 mile / 1.6km line of sight) and long battery life.
Features
• True UART to antenna solution
• 16-bit CRC error checking
• 100kbps max RF data rate
• 32 channels in DTS mode, 84 in
LP mode, North American version
• 19 unique channels in DTS mode,
52 unique channels in LP mode,
Brazilian version
• Small size – 0.8" x 0.935" (20.32
x 23.75mm)
• Low power Standby and Sleep
modes
• Includes PHY and MAC protocol
• CSMA medium access control
• 115dB link budget in DTS mode
• 4 modes allow user to optimize
power/range
• Command mode for volatile and
non-volatile configuration
• 48-bit unique address
• 5 volt tolerant I/O
• 868–870MHz European version
available
Applications
• Direct RD-232/422/485 Wire
replacement (requires external
RS-232 to 3V CMOS conversion
circuitry)
• Asset tracking
• Automated meter reading
• Industrial and/or home
automation
• RFID
• Wireless sensors
• Remote data logging
• Fleet management
TRM-915-DTS / TRM-915-DTS-BRZ
RF Transceiver Module
Data Guide
Figure 1: Package Dimensions
Revised 3/18/2015
0.935
(23.75mm)
0.800”
(20.32mm)
0.110”
(2.80mm)
A large-print version of this document is available at
www.linxtechnologies.com.