Epson 900 - Manual (Page 46)

Upgrading Your Memory
Your ActionNote has 8MB of memory on the
system board, and a socket in which you can
install a 4, 8, or 16MB snap-in memory module.
If you are using Instant On or Save to Disk,
you will need to rerun the PHDISK utility after
you have changed the amount of memory. See
Chapter 6 for more information.
CAUTION
A
memory
module is delicate and needs careful
handling. If you don’t fee/ confident installing it
yourself, ask your Authorized EPSON Servicer for
assistance.
Removing a Memory Module
Your computer may have a memory module
installed. If you want to replace it with a
higher-capacity module, follow the steps
below to remove the original memory module.
If it doesn’t have a module installed, see the
next section, “Installing a Memory Module,” to
install one.
1. Remove the keyboard as described in the
previous section.
Upgrading
Internal
Components 5-11