Bang & Olufsen BeoVision 9 User Guide User Manual

Page 55

Calibrate the speakers

Set up the speakers to optimise sound from

your listening position.

Calibrate the stand

The motorised movement of the TV will not

work until the calibration process has been
completed.

First-time setup of loudspeakers applies only to speakers for TV viewing.

After first-time setup, you can set up speakers for Home cinema viewing.

See also ‘Loudspeaker setup’ on pp. 54–55 and ‘Surround sound and

Home cinema’ on p. 30.

Adjust volume, bass, treble and loudness and preset two default speaker

combinations. Select a different speaker combination at any time. See

p. 35.

At ‘SET LEFTMOST

POSITION’ turn left to the

point you wish to restrict

the movement to

At ‘SET RIGHTMOST

POSITION’ turn right to the

point you wish to restrict the

movement to

Set preferred preset position for the TV to turn to, when it is switched

on and off. See p. 56.

NOTE! You need to calibrate the stand before you
can use the motorised movement of the stand.

When first-time setup is complete, you can then set up your loudspeakers for Home

cinema use.

Stand adjustment Set the maximum angle the TV will turn – left and right.

STAND POSITIONS

SPEAKER TYPES
SPEAKER ROLES
SPEAKER DISTANCE
SPEAKER LEVEL

SOUND ADJUSTMENT

STAND ADJUSTMENT