Beo4 operation – Bang & Olufsen BeoVision 9 User Guide User Manual

Page 13

Pause

Stop

Cue backwards/forwards

Select source of recorder

Select source of recorder. Playback begins automatically of the last viewed

recording, the newest recording or a recording in progress.

Switch off TV

Switch source

Playback

Slow playback

When you select a recording to play, the TV resumes playback from
where you left off the last time the same recording was played. If you
have viewed the recording to its end, playback starts from the
beginning. Unless otherwise instructed, the TV plays the selected
recording through to the end. The recording is then paused.
Slow playback backwards is not possible.

NOTE! You can bring up the ‘HARD DISC
CONTENT’ menu if you press and hold the
centre button. The bar at the top indicates
how full the hard disc is. A red dot
indicates if a recording is protected. For
information about protection, see p. 27.

Open ‘HARD DISC

CONTENT’ menu

Select

recording

Play

recording

Slow replay

Open ‘HARD DISC

CONTENT’ menu

Select and

play

Pause

Stop

Previous/next

Select point

Activate

numbers

Select point

Step backwards/forwards

Step

backwards/

forwards

Press twice Select recording

Play recording

Press twice Select

recording

Play recording

Switch source

Switch off TV

Beo4 operation

From pause mode, step frame by

frame

V.MEM

V MEM

STOP

0–9

PLAY