Calibrate colour accuracy of the screen, Useful hints – Bang & Olufsen BeoVision 9 User Guide User Manual

Page 38

Calibrate colour accuracy of the screen

NOTE! Never switch off your system or
disconnect it from the mains during calibration.

*Manual calibration

Calibration failed

All text is removed from the screen, the sensor arm swings down and

the calibration starts.
If the sensor arm does not swing down fully, the calibration is not

performed and the arm is retracted if needed. If the calibration was
initiated automatically, the TV will attempt to execute the calibration the
next time it is switched off.

Automatic Colour Management ensures perfect colours on the screen

continuosly. During calibration, a sensor arm swings down from the TV frame
and an on-screen bar changes between various greyscale colours.

Automatic calibration

Approximately for every 100 hours of use, the

TV will initiate a calibration automatically, when

you press the standby button.

After manual calibration

‘CALIBRATION COMPLETE’ shortly appears on

screen

Sensor arm retracts and TV returns to last

chosen source

Useful hints

Manual calibration

The TV must be switched on for more than two

minutes and be in TV mode for the ‘AUTO
COLOUR MANAGEMENT’ menu to be available.

Select ‘OPTIONS’

Bring up ‘TV SETUP’

Activate ‘AUTO

COLOUR

MANAGEMENT‘

Calibration process

begins*

We recommend that you let the TV perform calibration automatically, instead of manually.