Bang & Olufsen BeoVision 9 User Guide - Manual (Page 23)

1 *NOTE! If you have a Beo4 and you connect
the TV for use in a link room where other link
systems are already connected, such as
speakers, you must set the TV to Option 5
instead.
BeoMaster
Timer programming
If your TV is equipped with a BeoMaster, it cannot be set up and used in
a link room.
Programme a Play Timer on the TV in the main room.
Your television in a link room
If you have a BeoLink system, operate all connected systems through the TV
in a link room.
Follow the procedure described here when
you connect your TV for use in a link room.
Connect link room TV
For your entire system to function properly, it
is essential that the TV in the link room is set
to the correct option before you connect it to
the system in the main room. Place yourself
in front of the link room TV.
Set option for a link room TV
Press Select zone in which TV
is placed
Select OPTION? and
accept
Select V.OPT Select
Option 6* 1
Hold
and
Press
and
Hold Press
Option
pgm
LIST
…
LIST LIST 6
21
1 Connect the link room TV to the mains
supply.
2 Using your remote control, programme
the link room TV to the correct option.
3 Disconnect the link room TV from the
mains.
4 Make the necessary connections.
5 Reconnect the link room TV to the
mains supply.