Bang & Olufsen BeoSystem 3 Getting Started - Manual (Page 25)

In
st
al
la
tio
n
an
d
se
tt
in
g
up
1 *DVB
Copy-protected
programmes
The number and types of DVB sockets depend on which optional DVB module
is installed in the television.
If distorted picture quality is observed while viewing copy-protected pay-per
view programmes, connect the set-top box directly to the TV. Do not connect
through a VCR.
LINK TV
Aerial output for distribution of video signals to
other rooms.
DTV DATA
For future use.
MASTER LINK
For a compatible Bang & Olufsen audio or video
system. The socket is also used for BeoLink
distribution of sound and picture throughout the
house.
CENTRE 1
For connection of a centre speaker, e.g. BeoLab 7.
For further information, see the speaker’s own
guide.
POWER LINK 1–6
For connection of external speakers in a surround
sound setup. See the Guide for further
information.
1 (SUB)
For connection of up to two Bang & Olufsen
subwoofers. A cable splitter for such connections
is available from your Bang & Olufsen retailer.
IR IN (9-pin)
For the screen’s IR-receiver enabling remote
control operation.
MONITOR
For a plasma screen.
CINEMA
For a Home Automation system.
TTL/RS232
Only for use in Hotel setups.
IR IN (mini-jack)
For an extra IR-receiver when the TV is set up with
a projector.
IR 1+2
For an external IR-transmitter used with Home
cinema setups or an HDMI Expander.
~ – Mains supply
Connection to the mains supply.
VGA
Socket for connection of a High Definition video
source or a PC. You can also use this socket for
connection of a BeoMaster.
PCMCIA (CA module)
For insertion of a card and module for access to
digital channels. For further information about
compatible card and module combinations,
contact your Bang & Olufsen retailer.
SMARTCARD
For insertion of a card for access to digital
channels. For further information about
compatible card and module combinations,
contact your Bang & Olufsen retailer.
PHONES
For connection of stereo headphones.
> To mute speakers turn the volume wheel quickly
counter-clockwise. (Beo4: Press in the middle of
the button).
> Turn the volume wheel either way to adjust
volume in headphones. (Beo4: Press or ).
> To restore sound in speakers, turn the volume
wheel quickly counter-clockwise. (Beo4: Press
the middle of the button).
NOTE! Prolonged listening at high volume levels
can cause hearing damage!
The USB port ( ) is for software updates. Only
available if you have the optional DVB module. For
further information contact your retailer.
NOTE! Video recorders can only be connected to
the AV1 and AV2 socket groups, as these are the
only sockets groups for video output. Connect the
primary recorder to AV1 and the secondary
recorder to AV2.
Some sockets on the illustration of the main connection panel may be occupied by internal connections. Do not disconnect
the cables from these sockets!
B
25
For access to the sockets for temporary
connections, press the button (B) on the right side
of the system and the door opens automatically.
You can close the door manually.