LeMond g-force RT - Manual (Page 7)

Main G-Force Troubleshooting Guide 5 April 5, 2006
Document #300116 Rev. A
Carrier end caps loose
Probable Cause: Loose screws.
Potential Cause: Broken screw boss behind the lower screws.
Complaint: Seat Unintentionally Moves
Question: Is it moving forward and back, and how much?
If it slides back on the track more than 15mm see “If it is more than ½ inch front
to back” above.
If it is only 1/8 inch or so, see “If it is a little bit of movement front to back” above
Question: Is it unintentionally rotating?
Probable Cause: The pawls are not fully engaging.
Probable Cause: The seat rotation handle return spring is missing or broken.
Remove top front cover and check spring.
Potential Cause: The pawls are very worn. Would indicate as noticeable slop
between pawls.
Complaint: Scraping sound when adjusting seat front and back
Probable Cause: Seat selector lever is too long and scratches on the track.
Seat rotation
handle return
spring