Lanner LEC-7106 - Manual (Page 9)

9
System Components
Chapter 2
Embedded and Industrial Computing
Rear Components
Component Description Pin Definition Reference
R1 VGA Port The displays can support VGA up to 2048x1536
resolution.
VGA1 on page 14
R2 Four USB 2.0 Ports An USB type A connector. In additional to these
two ports, there are also 2 ports via internal pin
headers.
USB1, USB2 on Page 15
R3 10/100/1000Mbps LAN
ports
One RJ-45 (network) jack with LED indicators as
described below. The LAN port is provided by
Intel i210AT. The i210AT supports PXE remote
boot.
LINK/ACT (Yellow)
On/Flashing: The port is linking and active •
in data transmission.
Off: The port is not linking.
•
SPEED (Green/Amber)
Amber: The connection speed is •
1000Mbps.
Green: The connection speed is 100Mbps
•
Off: The connection speed is 10Mbps. •
R4 Antenna Hole Reserved for Antenna holes.
R5 DC-In (power) Connector DC +12V Power-in Connector. The LEC-7106
system supports screw-locked power plug
which allows secure power connection.
R6 Reset Reset switch RST1 on page 15
R3 R1 R2 R4
sPEEd LINK/ACT
R5 R6